Viewport Properties

This option will allow you to edit the Viewport properties.

Viewport
This is the name of the Viewport being changed

Name
Type the new viewport name in here.

Layer
Choose the layer for the new Viewport.

Easting
Enter the Easting of the bottom left corner of the viewport

Northing
Enter the Northing of the bottom left corner of the viewport.

Rotation
Enter the rotation as a survey bearing.

Scale
Enter the final scale factor for the plot.

X Extent
Enter the size in millimetres of the plot in the X direction. This will be the final size at printing.

Y Extent
Enter the size in millimetres of the plot in the Y direction. This will be the final size at printing.

Sheet Xo
The X offset of the sheet when the Viewport is printed on the sheet. The offsets are in mm.

Sheet Yo
The Y offset on the sheet when the Viewport is printed on the sheet. The offsets are in mm.

Size Options
Use the buttons on the right hand side to set the Viewport size. The options are:

A0+ 1000mm x 800mm
A0 900mm x 700mm
A1 770mm x 510mm
A2 594mm x 420mm
A3 420mm x 297mm
A4 297mm x210mm

For information on how to change the standard sheet sizes click here.